![]() Note that these settings only work from version 7 of VMware Workstation. If you use the "hdd" option in the "bios.bootOrder" line, you will need to add an additional line with the order of the desired virtual hard disks. ![]() In this configuration file, look for the "bios.bootOrder" parameter and edit it (or add it if necessary) like this : The last possibility to change the boot order of a VMware virtual machine is to modify its ".vmx" file. Change the boot order by modifying the vmx file Once you have finished using your bootable CD/DVD, don't forget to reset the type of firmware to UEFI and reactivate secure boot if it was activated in your virtual machine.ģ. Then, save the changes by pressing F10 and then press Enter.Īs expected, the virtual machine starts on your bootable CD/DVD Now, start on the virtual machine BIOS by using the "Power On to Firmware" option and move the "CD-ROM Drive" option up in the "Boot" tab. To do this, go to the "Options" tab, select "Advanced" and select "BIOS" in the "Firmware type" section. The only way to do this at the moment is to temporarily change the type of firmware in your virtual machine settings. When using a VMware virtual machine with EFI firmware, you can no longer boot from old bootable CDs/DVDs that are not compatible with EFI. Otherwise, this message will appear for a very short time. The 1st technique to boot on a bootable USB key or a bootable external hard drive consists in using the 'Plop Boot Manager' boot manager. As you can see, it's not possible to boot directly on an USB key. Then, go to the 'Boot' tab of the BIOS of your virtual machine. Connect your bootable USB key to your virtual machine. ![]() As expected, our virtual machine boots on our virtual bootable UBCD (Ultimate Boot CD) USB key. If the CD/DVD inserted in the virtual CD/DVD drive of your virtual machine is compatible with booting in EFI, then the virtual machine will boot on it. Boot on the virtual machine BIOS by clicking on : VM -> Power On to Firmware. The 'Plop Boot Manager' boot manager appears and we select 'USB' to boot from our virtual USB key. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |